Updated on: 28 October 2026
Architect certification means two different things. The license (called registration in some countries) is what lets you use the title "architect" and practise: in the US you earn it from a state licensing board after education (usually an accredited degree), experience in the Architectural Experience Program (AXP) and the six-division Architect Registration Examination (ARE). Credentials are voluntary and come on top of it: the NCARB Certificate, LEED AP, the Passive House Designer certificate, WELL AP, ACHA board certification or the PMP.
This guide explains the difference between a license and a certification, the US licensing path with its hours, fees and pass rates, the NCARB Certificate, licensing in the UK, Spain, Italy and Colombia, the best certifications by career goal and what it all costs. Every figure was checked on the issuer's own site in October 2026. Looking for AWS or Azure "architect" exams? Those are for software architects (see the FAQ).
Architect Certifications at a Glance
The license comes first; the other credentials are optional. Fees and requirements as of October 2026:
Credential | Issued by | Main requirements | Cost (October 2026) | Upkeep |
|---|---|---|---|---|
US architect license | The licensing board of each state or territory | A degree (NAAB-accredited in most states), the AXP, all six ARE divisions, local extras | NCARB Record $105, then $105 a year; ARE $1,578; board fees vary | Set by each board |
NCARB Certificate | NCARB | A US license, a NAAB or CACB degree, the AXP and the ARE | $1,415 to apply (no separate fee with an active Record) | $300 a year |
LEED Green Associate | GBCI (USGBC) | None | $250 ($200 USGBC members, $100 students) | 15 CE hours every 2 years |
LEED AP with specialty | GBCI (USGBC) | Green Associate (or the combined exam), age 18 | $550 combined ($400 members); $350 specialty only ($250) | 30 CE hours every 2 years |
Passive House Designer/Consultant | Passive House Institute (PHI) | An online exam or a documented Passive House project | See PHI and the course host | Valid 5 years; renewed by a project or CE points |
ACHA board certification | American College of Healthcare Architects | Candidate program, 3 years licensed, 6,000 healthcare hours, exam and portfolio | $400 application | See ACHA |
UK registration | Architects Registration Board (ARB) | Part 1, 2 and 3 and two years of practical experience | £40 or £124 application, plus £225 for 2026 | Annual fee and CPD |
WELL AP, Phius CPHC, PMP, EDAC, CSI CCS/CCCA | IWBI, Phius, PMI, The Center for Health Design, CSI | See the issuer | See the issuer | See the issuer |
License vs. Certification: What's the Difference?
A license is a legal requirement; a certification is not. In the words of the Texas Society of Architects, "The title 'architect' is a regulated term": only licensed professionals may legally call themselves architects. In the US the license comes from the board of a state or territory, and in the UK registration with the Architects Registration Board (ARB) plays the same role. A certification or credential, such as LEED AP or ACHA board certification, proves knowledge in a field, but it does not let you practise. The NCARB Certificate is a credential too, not a license, although it makes the next license easier to get.
Credentials show up as letters after a name. An NCARB Certificate holder may add "NCARB" (NCARB's own example is "John Doe, AIA, NCARB"), and a board-certified healthcare architect "ACHA". "AIA" refers to the American Institute of Architects, which people who are not yet licensed join as associate members ("Assoc. AIA"). What the title allows an architect to do is explained in our post on architect roles and responsibilities.
Neither a license nor a credential replaces what you can show: employers and clients also look at the architect skills in your portfolio and CV. Our guide to architect qualifications covers the education, experience and evidence they weigh.
How to Become a Licensed Architect in the US
There is no national architecture license in the US. Each of the 55 jurisdictions (the states and territories) licenses its own architects, and NCARB, which runs the experience program and the exam, "does not issue architecture licenses". The steps are similar everywhere (as of October 2026):
Open an NCARB Record. It documents your education, experience and exams, and costs $105 to apply and $105 a year.
Meet the education requirement. Most jurisdictions require a degree from a program accredited by the National Architectural Accrediting Board (NAAB); 17 offer other paths for people with another degree or none.
Complete the AXP. Report 3,740 hours of experience in six areas; at least half of the work must be supervised by an architect licensed in the US.
Pass the ARE. All 55 jurisdictions require the six divisions of the Architect Registration Examination. Your board decides when you may start, in most cases once you have met its education requirement.
Meet any local extras. Some boards ask for more experience or a supplemental exam.
Transmit your Record to the board where you want to be licensed.
California shows what the local extras look like: the California Architects Board asks for all ARE divisions, the California Supplemental Examination (CSE), the AXP (or Canada's IAP) and eight years of combined education and training, and candidates must be at least 18 (Business and Professions Code section 5552).
The AXP does not have to happen entirely in an architecture firm: up to 1,860 hours can come from setting O, which includes design competitions (up to 320 hours, approved by a mentor), construction work, community design centers and CSI's CCS and CCCA certifications (40 hours each). Design competitions are one more reason to keep your architecture portfolio current. Since November 2025, experience up to a year old earns 100 % credit and older experience 75 %, however old it is.
How long it takes: architects licensed in 2025 needed 12.3 years on average, counting the degree, the AXP and the ARE, and the AXP and the ARE together took 7.3 years, according to NCARB by the Numbers 2026. Nearly 3,500 candidates became architects that year. Our guide to architecture courses covers the degrees and classes that lead to the first step.
The ARE 5.0: Six Divisions, Fees and Pass Rates
The ARE 5.0, developed by NCARB, has six divisions that you schedule and pay for separately and can take online, at a test center or both. Each division aligns with one AXP experience area:
ARE division (and AXP area) | AXP hours | 2025 pass rate |
|---|---|---|
Practice Management | 160 | 51 % |
Project Management | 360 | 63 % |
Programming & Analysis | 260 | 59 % |
Project Planning & Design | 1,080 | 48 % |
Project Development & Documentation | 1,520 | 54 % |
Construction & Evaluation | 360 | 61 % |
Total | 3,740 | 55 % overall |
The pass rates cover all candidates, first-time and repeat; the overall rate of 55 % was the same as in 2024. As of October 2026, each division costs $263 ($1,578 for all six), a retake costs another $263 and can be taken 60 days after the previous attempt, up to three times in 12 months (NCARB fees). Passed divisions no longer expire: NCARB has retired the five-year limit.
NCARB updated the exam on 27 April 2026 with minor changes to 12 of its 91 objectives and new formatting for the case studies; the divisions, the number of items and the testing time stayed the same. NCARB says new pathways to licensure would not be announced until 2027 at the earliest.
The NCARB Certificate: Reciprocity and Working Abroad
The NCARB Certificate is a credential for licensed architects, and more than 50,000 hold one. To get it you need a degree from a NAAB- or CACB-accredited program, the AXP, the ARE and a license from a US board; architects without a NAAB degree and architects licensed abroad have separate paths, the Education Alternative and the International Architect Path. The Certificate "is not a license to practice architecture": only the boards grant that.
What it is for is the next license. Many states require the Certificate for a reciprocal license and all of them accept it. Abroad, NCARB has mutual recognition agreements with Australia, Canada, New Zealand and the UK, a tri-national agreement with Canada and Mexico, and a route to South Africa; the UK route is paused, because its UK Adaptation Assessment is unavailable until a new module, RfPUK, arrives in spring 2027 (NCARB). Holders also get free continuing education. As of October 2026, it costs $1,415 to apply and $300 a year, but candidates who keep their NCARB Record active pay no separate application fee and get the first year free.
Licensing Outside the US
The route to the title differs from country to country. Four examples, as of October 2026:
United Kingdom: ARB Registration
In the UK you must register with the Architects Registration Board (ARB) to use the title "architect"; RIBA notes that it is not the registration body itself. The current route is Part 1, Part 2 and Part 3 plus two years of practical experience, and ARB is moving to a new framework of Competency Outcomes. Joining the register costs a £40 application fee within two years of Part 3 (£124 later) plus the registration fee, £225 for 2026, reduced by quarter during the year (ARB fees). CPD is a legal requirement under the Building Safety Act 2022: ARB's scheme is not points-based and suggests at least eight activities a year, covering the two mandatory topics, fire and life safety and environmental sustainability. Our guide to CPD for architects explains how to plan it.
Spain: Degree, Máster Habilitante and Colegiación
In Spain, the qualification that entitles you to practise is the Máster habilitante (60 ECTS credits), which follows a 300-credit degree (BOE). To practise you must also join the Colegio Oficial de Arquitectos of your professional address: colegiación is compulsory for architects, with an exemption in some regions for those who work only in the public administration.
Italy: Esame di Stato and the Albo
In Italy, you qualify through the Esame di Stato (state exam) for Section A of the Albo, set by D.P.R. 328/2001: a design test (a building or an urban-scale intervention), a written test on its structural or settlement dimensioning, a second written test on architectural culture, and an oral exam that also covers legislation and professional ethics (University of Bologna). After passing, you register with the Albo; continuing training has been compulsory since 1 January 2014.
Colombia: The CPNAA Matrícula Profesional
In Colombia, the CPNAA (Consejo Profesional Nacional de Arquitectura y sus Profesiones Auxiliares), created by Law 435 of 1998, issues the matrícula profesional de arquitectura and oversees the practice of the profession. In other countries, ask the national architects' council or professional body before you plan your route.
Best Certifications for Architects by Career Goal
After the license, the best certification is the one that matches the work you want to do. The table at the top compares fees and requirements; here is what each credential is for.
Core Licensure: The ARE and a State License
Every path starts with the license. In the US that means the ARE, developed by NCARB, whose six divisions cover practice management, project management, programming and analysis, project planning and design, project development and documentation, and construction and evaluation; in most states you can start it once you meet your board's education requirement, and it leads to a state license (the steps). No credential below replaces it, and some require it: ACHA asks for three years of licensure and the NCARB Certificate for a current license.
Sustainability and Building Performance: LEED, Passive House and WELL
LEED Green Associate and LEED AP. LEED credentials are issued by Green Business Certification Inc. (GBCI), and more than 203,000 professionals hold one (USGBC). The LEED Green Associate suits those new to green building: no prerequisites and a two-hour exam of 100 multiple-choice questions, at a Prometric center or online. The LEED AP with specialty is for architects who work on LEED projects: it adds one rating system (Building Design + Construction, BD+C, or O+M, ID+C, ND or Homes), requires the Green Associate or the combined exam, and USGBC strongly recommends experience on a LEED-registered project. LEED v5 is available for BD+C, ID+C and O+M.
Certified Passive House Designer or Consultant. This is the Passive House Institute's (PHI) credential for ultra-low-energy buildings. Under PHI's regulations valid from January 2025 there are two alternative routes: pass PHI's online exam, which you book with an accredited course and exam host (the course itself is optional), or submit the documentation of a Passive House project. The exam is passed with at least half of the marks. You receive the Designer or the Consultant title depending on your educational qualification. The certificate is valid for five years and is renewed with another project documentation or continuing education credit points, not by retaking the exam.
Phius CPHC and WELL AP. Phius, a separate US organization, runs its own credential, the Phius Certified Consultant (CPHC), which is not the same as PHI's certificate. The WELL AP of the International WELL Building Institute (IWBI) covers the WELL standard for health and well-being in buildings. Check both issuers for current requirements and fees.
Healthcare Architecture: ACHA Board Certification and EDAC
ACHA board certification. The American College of Healthcare Architects (ACHA) provides board certification to architects who specialize in health care, in the US and in countries where NCARB reciprocal licensure can be obtained; certificants may write "ACHA" after their name. Its credential is board certification, not a "Certified Healthcare Architect (CHA)" title. Before applying you join the ACHA Candidate program, hold a license for at least three consecutive years and log at least 6,000 hours of healthcare work in the last five years (up to 2,000 of them may come before licensure, inside the candidate program). The application fee is $400 and non-refundable; you then have five years to pass the exam and the portfolio and exhibit submission, in either order.
EDAC. The Evidence-Based Design Accreditation and Certification (EDAC) of The Center for Health Design is a credential in evidence-based healthcare design. Check the Center for Health Design for its current exam and fees.
Project Delivery and Construction Documents: PMP, CCS and CCCA
PMP. The Project Management Professional (PMP) of the Project Management Institute (PMI) is a general project management credential, used by architects who lead large teams, schedules and budgets. PMI sets its own experience, training and exam requirements; check them on PMI's site before you plan. If you also run a practice, see our guide on how to grow an architecture business.
CCS and CCCA. The Construction Specifications Institute (CSI) offers the CCS and CCCA certifications for construction specifications and contract administration. NCARB counts each of them as 40 AXP hours in setting O: the CCS toward Project Planning & Design, the CCCA toward Construction & Evaluation.
Course and Software Certificates vs. Credentials
A course's certificate of completion shows that you finished the course, and a software certificate shows skill in one program. Neither is a professional credential like the ones above, which an independent body awards after an exam or a review of your work. Both still strengthen a CV or a portfolio, for example after architectural rendering courses or training in BIM software for architects.
How to Prepare for the ARE and Other Credential Exams
Plan the ARE along your AXP. Each division aligns with an AXP experience area, so you can schedule a division when you are gaining experience in the same area.
Start with the free official material. NCARB offers free ARE 5.0 practice exams and the ARE 5.0 Guidelines; USGBC publishes candidate handbooks for the LEED Green Associate and LEED AP exams.
Know the retake and rescheduling rules. A failed ARE division can be retaken after 60 days, up to three times in 12 months; rescheduling 31 or more days ahead is free up to three times.
Choose how you test. The ARE can be taken online, at a test center or both; LEED exams at a Prometric center or with a remote online proctor.
Treat prep courses as optional. The PHI exam can be taken without the course, and LEED and the ARE have no required course.
Check the issuer's page before you book. Fees, exam versions and requirements change; every figure in this guide is as of October 2026.
How Much Does Architect Certification Cost?
In the US, the licensing path costs at least the NCARB Record ($105 to apply, which covers the first year, then $105 a year) and the six ARE divisions ($1,578 if you pass each one the first time; every retake is another $263), as of October 2026. Four years of an active Record and six divisions passed at the first attempt come to $1,998 in NCARB fees. Your jurisdiction adds its own application and license fees, and tuition is separate. Later, the NCARB Certificate costs $1,415 to apply and $300 a year, unless you kept your Record active as a candidate: then there is no separate application fee and the first year is free.
Specialty credentials cost less, from $250 for the LEED Green Associate exam to $550 for the combined LEED AP exam, with lower fees for USGBC members; the table at the top lists each fee. In the UK, first registration with ARB costs £40 or £124 plus £225 for 2026.
What the license gives you, in NCARB's words: the title (you can officially call yourself an architect), independence (you can practise independently), trust from firms, clients and the public, skills, and advancement through greater career opportunities. For what architects earn, see the official pay figures in our guide to the types of architects.
Try it in ArchiVinci
A credential shows what you know; your portfolio and competition boards show what you design. Upload a sketch, a photo or a 3D model view, describe the result in a sentence, and the AI render generator creates a new image that follows your upload, in seconds. A new account starts with 3 free credits, and commercial use of the images needs an active plan.
For your projects: ArchiVinci for architects
Frequently Asked Questions
Which certification is best for an architect?
Start with the license: it is the only one that lets you practise and use the title. After it, choose by goal: the LEED Green Associate or LEED AP for green building, PHI's Passive House Designer or Consultant for ultra-low-energy design, ACHA board certification for healthcare, the NCARB Certificate for licenses in other states and in countries with an agreement, and the PMP for project management.
Do I need multiple certifications to advance in my career?
No. In the US only the license is required to practise; every other credential is optional. Choose the one that matches your projects, because each adds renewal fees or continuing education, such as 30 hours every two years for a LEED AP.
Is the ARE required for all architects?
In the US, yes: all 55 jurisdictions require you to pass all six ARE divisions, besides the education and experience requirements. Other countries use their own routes: Part 3 and ARB registration in the UK, the Máster habilitante and colegiación in Spain, the Esame di Stato in Italy.
What are the LEED and Passive House exams like?
The LEED Green Associate exam takes two hours and has 100 multiple-choice questions; the LEED AP specialty exam has another 100, and the combined exam has 100 per section. Both can be taken at a Prometric center or online with a remote proctor. PHI's Passive House Designer/Consultant exam is taken online on PHI's platform and passed with at least half of the marks; documenting a Passive House project is the alternative to the exam.
Is the NCARB Certificate the same as a license?
No. The NCARB Certificate "is not a license to practice architecture"; only state and territory boards grant licenses. It requires a US license and makes the next one easier to get: many states require it for a reciprocal license and all accept it, and NCARB has mutual recognition agreements with Australia, Canada, New Zealand and the UK.
What does ACHA certification require?
Participation in the ACHA Candidate program, at least three consecutive years of licensure and at least 6,000 hours of healthcare work in the last five years. Then a $400 application and, within five years, an exam and a portfolio and exhibit submission. Certificants write "ACHA" after their name.
Should I get certified early in my career or wait until I gain more experience?
Some credentials fit early in a career: the LEED Green Associate has no prerequisites and costs $100 for students, and you can open an NCARB Record and report AXP experience gained after high school. Report it promptly: since November 2025, experience up to a year old earns 100 % credit and older experience 75 %. Others need experience by design: the NCARB Certificate needs a license, and ACHA certification three years of licensure and 6,000 healthcare hours.
What are the 6 ARE exams?
The ARE 5.0 has six divisions: Practice Management, Project Management, Programming & Analysis, Project Planning & Design, Project Development & Documentation, and Construction & Evaluation. Each is scheduled and paid for separately ($263 as of October 2026) and aligns with an AXP experience area; the table above lists their hours and 2025 pass rates.
What is an architect's certificate in a construction contract?
In construction, the architect also "certifies" in the contract sense. In US practice, the architect's basic services usually include reviewing and approving the contractor's monthly pay requests and issuing the Certificate of Substantial Completion, and lenders normally ask the architect to certify the level of completion (AIA Contract Documents). In the UK, ARB issues certificates that prove a registration, for example for the mutual recognition routes (£80). In Spain, end-of-works certificates (certificaciones de final de obra) are work for a registered, colegiado architect.
Are there construction or detailing certifications for architects?
Yes. The Construction Specifications Institute (CSI) offers the CCS and CCCA certifications for construction specifications and contract administration, and NCARB counts each as 40 hours toward the AXP. For energy-efficient construction, PHI's Passive House Designer/Consultant certificate proves a special qualification in that field.
Are AWS or Azure "architect certifications" for building architects?
No. Searches for "architect certification" also show cloud and software credentials, such as the solutions architect exams of AWS, Microsoft Azure or Google Cloud. They certify IT architects who design software systems, not building architects, whose core qualification is the license. For how AI is changing the work of building architects, read will AI replace architects?
